Heitor Faroni is Director of Solutions Marketing for Alcatel-Lucent Enterprise.
Distributed Denial of Service (DDoS) attacks jumped into the mainstream consciousness last year after several high-profile cases – one of the largest and most widely reported being the Dyn takedown in Fall 2016, an interesting example as it used poorly secured IoT devices to coordinate the attack. While not necessarily a new threat, they have in fact been around since the late ’90s.
When you consider that Gartner predicts that by 2020 it is predicted there will be 20 billion connected devices as part of the growing Internet of Things, the need to implement the right network procedures and tools to properly secure all these devices is only going to grow.
The New Battleground – Rent-a-bots on the Rise
Put simply, DDoS attacks occur when an attacker attempts to make a network resource unavailable to legitimate users by flooding the targeted network with superfluous traffic until it simply overwhelms the servers and knocks the service offline. Thousands and thousands of these attacks happen every year, and are increasing both in number and in scale. According to some reports, 2016 saw a 138 percent year-over-year increase in the total number of attacks greater than 100Gbps.
The Dyn attack used the Mirai botnet which exploits poorly secured, IP-enabled “smart things” to swell its ranks of infected devices. It is programmed to scan for IoT devices that are still only protected by factory-set defaults or hard-coded usernames and passwords. Once infected, the device becomes a member of a botnet of tens of thousands of IoT devices, which can then bombard a selected target with malicious traffic.
This botnet and others are available for hire online from enterprising cybercriminals; and as their functionalities and capabilities are expanded and refined, more and more connected devices will be at risk.
So what steps can businesses take to protect themselves now and in the in the future?
First: Contain the Threat
With the rise of IoT at the heart of digital business transformation and its power as an agent for leveraging some of the most important technological advances – such as big data, automation, machine learning and enterprise-wide visibility – new ways of managing networks and their web of connected devices are rushing to keep pace.
A key development is IoT containment. This is a method of creating virtual isolated environments using network virtualization techniques. The idea is to group connected devices with a specific functional purpose, and the respective authorized users into a unique IoT container. You still have all users and devices in a corporation physically connected to a single converged network infrastructure, but they are logically isolated by these containers.
Say, for example, the security team has 10 IP-surveillance cameras at a facility. By creating an IoT container for the security team’s network, IT staff can create a virtual, isolated network which cannot be accessed by unauthorized personnel – or be seen by other devices outside the virtual environment. If any part of the network outside of this environment is compromised, it will not spread to the surveillance network. This can be replicated for payroll systems, R&D or any other team within the business.
By creating a virtual IoT environment you can also ensure the right conditions for a group of devices to operate properly. Within a container, quality of service (QoS) rules can be enforced, and it is possible to reserve or limit bandwidth, prioritize mission critical traffic and block undesired applications. For instance, the surveillance cameras that run a continuous feed may require a reserved amount of bandwidth, whereas critical-care machines in hospital units must get the highest priority. This QoS enforcement can be better accomplished by using switches enabled with deep-packet inspection, which see the packets traversing the network as well as what applications are in use – so you know if someone is accessing the CRM system, security feeds or simply watching Netflix.
Second: Protection at the Switch
Businesses should ensure that switch vendors are taking the threat seriously and putting in place procedures to maximize hardware protection. A good approach can be summed up in a three-pronged strategy.
- A second pair of eyes – make sure the switch operating system is verified by third-party security experts. Some companies may shy away from sharing source code to be verified by industry specialists, but it is important to look at manufacturers that have ongoing relationships with leading industry security experts.
- Scrambled code means one switch can’t compromise the whole network. The use of open source code as part of operating systems is common in the industry, which does come with some risk as the code is “common knowledge”. By scrambling object code within the switch’s memory, even if a hacker could locate sections of open source code in one switch each would be scrambled uniquely, so the same attack would not work on multiple switches.
- How is the switch operating system delivered? The IT industry has a global supply chain, with component manufacturing, assembly, shipping and distribution having a worldwide footprint. This introduces the risk of the switch being tampered with before it gets to the end-customer. The network installation team should always download the official operating systems to the switch directly from the vendor’s secure servers before installation.
Third: Do the Simple Things to Secure Your Smart Things
As well as establishing a more secure core network, there are precautions you can take right now to enhance device protection. It is amazing how many businesses miss out these simple steps.
- Change the default password – One very simple and often overlooked procedure is changing the default password. In the Dyn case, the virus searched for default settings of the IP devices to take control.
- Update the software – As the battle between cybercriminals and security experts continues, the need to stay up-to-the-minute with the latest updates and security patches becomes more important. Pay attention to the latest updates and make it part of the routine to stay on top.
- Prevent remote management – Disable the remote management protocol, such as telnet or http, that provide control from another location. The recommended remote management secure protocols are via SSH or https.
Evolve Your Network
The Internet of Things has great transformative potential for businesses in all industries, from manufacturing and healthcare to transportation and education. But with any new wave of technical innovation comes new challenges. We are at the beginning of the IoT era, which is why it’s important to get the fundamental network requirements in place to support not only the increase in data traversing our networks, but enforcing QoS rules and minimizing risk from cyberattacks.
Opinions expressed in the article above do not necessarily reflect the opinions of Data Center Knowledge and Penton.
Read more here:: datacenterknowledge.com/feed/
The post Checklist for Getting a Grip on DDOS Attacks and the Botnet Army appeared on IPv6.net.
Read more here:: IPv6 News AggregatorPosted on: July 14, 2017