Where Have All the Firewalls Gone? Security Risks in Residential IPv6 Transition
When most home internet connections still relied on IPv4, Network Address Translation (NAT) served...
Our latest blog posts:
Stretching the Limits: The Impact of IPv6 on Low-Power Wide-Area Networks (LPWANs)
When engineers first started connecting tiny, battery-powered sensors to the internet, they...
Latest technology news:
Geniatech introduces SMARC and OSM system-on-modules powered by NXP i.MX 95 SoC
Geniatech has released two new System-on-Modules (SoMs) powered by the NXP i.MX 95 Edge AI application processor: the OSM 1.1 Size L-compliant SOM-iMX95-OSM and the SMARC 2.1-compliant SOM-iMX95-SMARC. Both ship with up to...
De opmars van private 5G in het mkb+
Private 5G bereikt het mkb. Waar de technologie eerst vooral was voorbehouden aan grote industriële spelers, verschijnen nu de eerste concrete toepassingen bij middelgrote organisaties. Pilots in logistiek, zorg en industrie...
reComputer Industrial R2135-12 review – A Raspberry Pi CM5-powered fanless Edge AI PC with Hailo-8 AI accelerator
Hello, today I am going to review the reComputer AI Industrial R2135-12 from Seeed Studio. This is an industrial edge computer built around the Raspberry Pi Compute Module 5 platform. The model is configured with 8 GB LPDDR4...
WeAct CAN485 – A low-cost ESP32 board with CAN Bus and RS485 interfaces
WeAct CAN485 is a low-cost ESP32 board with CAN Bus and RS485 interfaces implemented through transceivers with 2.5kV isolation from Shanghai Chipanalog Microelectronics Co., Ltd. or Chipanalog for shorts. The board supports WiFi...
ESP-SensairShuttle ESP32-C5 kit supports Bosch Sensortec’s BME690, BMI270, BMM350 environmental and motion sensors
Jointly developed by Espressif Systems and Bosch Sensortec, the ESP-SensairShuttle kit comprises an ESP32-C5 development board that can be interfaced with a choice of two sensor daughterboards. It is designed for motion sensing...
eWeLink CUBE OS enables all SONOFF WiFi and Zigbee devices to connect to Matter
All SONOFF WiFi and Zigbee home automation devices can now work with the Matter protocol. This can be done in two ways: Software path (free of charge) – Use eWelink CUBE OS on a Raspberry Pi or other host computer to bridge...
Start learning today:
Recommended books
