ipfire ipv6 support

Spirent adds BeiDou Phase-3 signals to its GNSS RF constellation simulators

By Zenobia Hegde

Spirent Communications plc, the provider in BeiDou, GPS and other global navigation satellite systems (GNSS) testing solutions, announced that BeiDou Phase 3 signals have been added to its GNSS RF constellation simulators.The addition of these new signals to the GSS7000 and GSS9000 simulators follows the launch of the first two Beidou-3 satellites in November 2017.

Phase 3 of the Chinese BeiDou system will extend its coverage from Asia to the whole world, and will provide receiver developers and integrators with additional GNSS signals to make positioning, navigation and timing systems more accurate, and help to support new applications, such as autonomous vehicles.

The new signals will use the same carrier frequencies as the GPS and Galileo systems, so chipset manufacturers and device developers will need to test integrated designs to avoid problems caused by confusing data from different GNSS.

“By offering the BeiDou Phase 3 signals, our customers can test their designs well before the system is fully operational, which is expected in 2020,” said Stuart Smith, lead product manager. “With signals already starting to appear, it is important for developers to have test tools that can ensure devices will successfully make use of all GNSS signals.”

BeiDou Phase 3 signals are available immediately on the GSS7000 and GSS9000 simulators, and existing users can obtain the software upgrade by contacting Spirent.

Comment on this article below or via Twitter: @IoTNow_OR @jcIoTnow

The post Spirent adds BeiDou Phase-3 signals to its GNSS RF constellation simulators appeared first on IoT Now – How to run an IoT enabled business.

Read more here:: www.m2mnow.biz/feed/

Machfu Announces Release of MACH-3 Industrial Internet of Things Platform and Gateway

By IoT – Internet of Things

Machfu, an Industrial Internet of Things (IIoT) technology company, announced today the release of its MACH-3 IIoT Gateway, a device allowing companies in energy, water, oil and gas as well as other industrial segments to seamlessly connect legacy infrastructure to cloud based IoT and existing SCADA systems. The product was designed to both simplify the […]

The post Machfu Announces Release of MACH-3 Industrial Internet of Things Platform and Gateway appeared first on IoT – Internet of Things.

Read more here:: iot.do/feed

Machfu announces release of MACH-3 IIoT platform and gateway

By Zenobia Hegde

Machfu, an Industrial Internet of Things (IIoT) technology company, announced the release of its MACH-3 IIoT Gateway, a device allowing companies in energy, water, oil and gas as well as other industrial segments to seamlessly connect legacy infrastructure to cloud based IoT and existing SCADA systems.

The product was designed to both simplify the connection and management of devices as well as provide a secure and easily customisable application framework to process and manage data at the network edge. The versatile functionalities of the MACH-3 IIoT Gateway will be demonstrated at the 2018 DistribuTECH show, January 22-25 in San Antonio, Texas.

“The MACH-3 IIoT Gateway allows companies to securely gather actionable data from legacy infrastructure in an elegant and straightforward manner, enabling them to make informed, strategic business decisions in ways that would previously require enormous financial and time investments,” said Prakash Chakravarthi, CEO, Machfu.

Deployment of this platform enables enterprises to easily access and analyse data from diverse sources (i.e. sensors, controllers, smart grids, etc.) via secure wireless and wired connectivity as well as create and rapidly integrate “edge” and “emerging web-based” industrial IoT applications to existing infrastructure.

The application framework is “sandboxed” providing enterprises much needed flexibility in terms of adding/deleting APPs and drivers over the life of their system—much like a smartphone—based on their specific needs and/or requirements. Defense-in-depth security has also been built into the platform and extends from the physical to application layers.

“The resulting IIoT solutions decrease time to action and connectivity costs, while, simultaneously, minimising disruption and risk to existing automation systems,” added Chakravarthi.

There are many practical applications and benefits for the MACH-3 IIoT Gateway in the energy industry. “Using Machfu’s industrial hardened gateway, utilities can create and rapidly integrate next generation distributed control systems,” said John Geiger, V.P. business development, Machfu.

“For example, the Gateway provides the ability for any sensor to be transported as DNP3 objects to head-end SCADA applications over both private and public networks. It also provides a secure cellular overlay to existing private networks. The flexibility and versatility of the platform is its greatest asset.”

Machfu will be demonstrating the product at DistribuTECH 2018 held January 22-25 in San Antonio, TX (Booth 1862).

Comment on this article below or via Twitter: @IoTNow_OR @jcIoTnow

The post Machfu announces release of MACH-3 IIoT platform and gateway appeared first on IoT Now – How to run an IoT enabled business.

Read more here:: www.m2mnow.biz/feed/

Haier Unveils Complete Smart Home Solutions at CES

By IoT – Internet of Things

The 51st CES, the world’s most influential event for the technology industry, was held in Las Vegas from January 9th to 12th, Pacific Time. Intelligence and technology became the mainstream at this year’s session, where more than 3,900 exhibitors from around the world showcased their latest technological achievements. Chinese brand Haier displayed the world’s first […]

The post Haier Unveils Complete Smart Home Solutions at CES appeared first on IoT – Internet of Things.

Read more here:: iot.do/feed

Qorvo IoT Solution Powers Senior Home Care

By IoT – Internet of Things

Qorvo® is helping seniors live more independently in their homes with the help of a new eHealth system powered by the company’s chipsets for the Internet of Things (IoT). Health insurer CZ will provide the system to 3,000 elderly customers in the Netherlands, marking the first deployment of a senior smart home solution by a […]

The post Qorvo IoT Solution Powers Senior Home Care appeared first on IoT – Internet of Things.

Read more here:: iot.do/feed

IoT device security startup Cog Systems closes $3.5M Series A

Cog Systems, an IoT device security startup from Sydney raised a $3.5M Series A round from the Grok Ventures led by Co-founder of software firm Atlassian.

D4 Secure Mobile – Architecture

Cog Systems primarily provides device protection and secure communication via its D4 platform offering non-bypassable full disk encryption, nested VPNs, separation kernel protection, and isolated key store.

It also provides embedded software SDKs (software development kits). The startup is targeting enterprise and government customers as it recently named Immix Group as the distributor to US Local, State, and Federal government. Customers can use the technology to secure their voice, video, and call data using Cog System’s D4 encryption technology. Mobile, gateways and IoT devices are the main devices secured by Cog Systems.

“Security of connected devices is increasingly an important challenge to solve. The team at Cog is world-class with deep expertise in solving complex problems.”Cannon-Brookes, co-founder Atlassian

The startup plans to use the funding proceeds to open a new office in San Francisco. It already operates offices in Sydney and Chicago. “By steering the security architecture from monolithic to modular, we have brought proactive security to governments and the enterprise without compromising the user experience,” said Cog Systems CEO Daniel Potts.

Read more here:: feeds.feedburner.com/iot

Internet of Things Platforms and Projects: 3 Programming Languages Worth Knowing

By Ashish Trikha

Click to learn more about author Ashish Trikha. Love it or hate it, but the Internet of Things (IoT) is not going away anytime soon. In recent times, the Internet of Things has permeated our day to day lives to improve the way we live, the way we work, and the way we entertain. In […]

The post Internet of Things Platforms and Projects: 3 Programming Languages Worth Knowing appeared first on DATAVERSITY.

Read more here:: www.dataversity.net/feed/

Hyperconvergence and computation at the edge: Part 3

By Zenobia Hegde

The adoption of edge and fog computing models is enabling enhanced efficiency, says Bob Emmerson. Data is generated at the edge and bringing processing power close to the source generates real-time information on which informed decisions and actions can be taken. This is an established trend that companies like VMware and Eurotech are advancing.

VMware provides a software-defined approach to hyperconvergence. It employs a hypervisor, aka a virtual machine monitor, in order to create and run virtual machines that deliver compute, storage and management in a tightly integrated software stack. Eurotech is an established supplier of enterprise-class Industrial IoT solutions that combine the company’s strengths on the Operational Technology (OT) side with the Information Technology (IT) expertise of ecosystem partners.

In the context of the trend towards edge computing, the two organisations have developed technology that employs VMware virtualisation technology, taking it from its regular role in the data centre / cloud and extending the benefits out to the edge of the OT network.

This development raises the hyperconvergence bar. The consolidation of functional elements in data centres at the hypervisor level, together with federated management, reduces inefficiencies and minimises the total cost of ownership of the underlying IT infrastructure. In order to provide similar benefits at the edge, Eurotech has signalled plans to market edge server and IoT gateway products that are pre-installed with VMware virtualisation technology.

The implementation of VMware hypervisor technology on transportation-grade hardware, e.g. Eurotech’s rail certified fan-less edge server platform, was demonstrated at the VMworld 2017 Events in Las Vegas and Barcelona.

The planned products also address application scenarios where multiple computer systems are deployed, each of which enables a specific OT solution. These systems will typically involve different hardware and software implementations, which will inevitably result in logistic and support problems, thereby reducing operational performance and increasing maintenance costs.

Employing virtualisation technology at the edge addresses these issues by reducing the effort and cost for managing and maintaining the various systems. Typical multiple computer systems range from demanding transportation solutions such as rolling stock, construction & mining machines, marine vessels, smart energy / smart grid and retail.

That was a short take on a development that looks set to play a significant role on the OT side of hyperconverged infrastructures. That said, it is work in progress and we will surely see similar but alternative concepts. For example, in the next blog which focuses on secondary storage, dedicated OT hardware products at the edge are replaced by hyperconverged nodes running vSphere, which is VMware’s cloud computing virtualisation platform.

The author of this blog is Bob Emmerson, freelance IoT writer and commentator.

Comment on this article below or via Twitter: @IoTNow_OR @jcIoTnow

The post Hyperconvergence and computation at the edge: Part 3 appeared first on IoT Now – How to run an IoT enabled business.

Read more here:: www.m2mnow.biz/feed/

Garmin and NXT-ID Subsidiary FitPay Announce Garmin Pay Now Live on Garmin vívoactive 3 Smartwatch

By IoT – Internet of Things

Garmin International, Inc. and Fit Pay, Inc., a wholly owned subsidiary of NXT-ID, Inc. recently announce that the Garmin PayTM contactless payment feature is now live on Garmin’s vívoactive 3 smartwatch and available to cardholders of issuing banks supporting the new service. The new feature on Garmin’s latest smartwatch enables consumers to make highly secure […]

The post Garmin and NXT-ID Subsidiary FitPay Announce Garmin Pay Now Live on Garmin vívoactive 3 Smartwatch appeared first on IoT – Internet of Things.

Read more here:: iot.do/feed

Garmin and NXT-ID Subsidiary FitPay Announce Garmin Pay Now Live on Garmin vívoactive 3 Smartwatch

By News Aggregator

By IoT – Internet of Things

Garmin International, Inc. and Fit Pay, Inc., a wholly owned subsidiary of NXT-ID, Inc. recently announce that the Garmin PayTM contactless payment feature is now live on Garmin’s vívoactive 3 smartwatch and available to cardholders of issuing banks supporting the new service. The new feature on Garmin’s latest smartwatch enables consumers to make highly secure […]

The post Garmin and NXT-ID Subsidiary FitPay Announce Garmin Pay Now Live on Garmin vívoactive 3 Smartwatch appeared first on IoT – Internet of Things.

Read more here:: iot.do/feed

The post Garmin and NXT-ID Subsidiary FitPay Announce Garmin Pay Now Live on Garmin vívoactive 3 Smartwatch appeared on IPv6.net.

Read more here:: IPv6 News Aggregator